Description of 200mm Stainless Steel Standard Laboratory Test Sieve
Test sieve is recommended for general laboratory use and for the fine sieving of size particles. It enjoys the following advantages:
1. Typically requires 50-150g of sample material
2. Setting time limits for 1 second -9999 seconds
3. Up to 9 fractions in one sieving operation
4. One person can pick up it
5. Approved ISO 9001:2008, CE and BV certificates
||1-8 layer as requested
|| Less than 50
||Less than 200g
Matters needing attention before usage:
a. Turn off power supply when the machine is not in use for an extended period of time.
b. Clean the sieves after operation, so they will be ready for use next time.
c. Do not splash water on the machine to avoid current leakage.
d. Turn the machine off immediately in the event of unusual noises and inspect for blockage or other irregularities.
e. Always ensure the lock nut are securely tightened before operation.
How to operate for getting good analysis result?
||Weighing the tested material
||Place sieves with required mesh on the machine base sequentially
||Pour the tested material into the top of sieve
||The above step is OK, then cover with the lid and set the right time
||It's time to set up, power off
||Remove the lid and sieves one by one from the top to bottom
||Summary: measure the weight of test material leaved on each sieve and bottom pan, and then gets their proportion and other related analysis result.
If you need one set of test sieve, please let's know the following requirements:
1. How many sieves you need at once
2. The mesh size of each sieves
3. Please suggest the voltage in your plant
Friends, email us tell your requirements for getting best price and cooperation chance.